ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
  
  components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
  
  
   
  
   
  
  
  Features
  
  
  Power Supply: VDD=1.2V Typical
  
  VDDQ = 1.2V Typical
  
  VPP - 2.5V Typical
  
  VDDSPD=2.2V to 3.6V
  
  Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  
  Low-power auto self refresh (LPASR)
  
  Data bus inversion (DBI) for data bus
  
  On-die VREFDQ generation and calibration
  
  Single-rank
  
  On-board I2 serial presence-detect (SPD) EEPROM
  
  16 internal banks; 4 groups of 4 banks each
  
  Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  
  Selectable BC4 or BL8 on-the-fly (OTF)
  
  Fly-by topology
  
  Terminated control command and address bus
  
  PCB: Height 1.23” (31.25mm)
  
  RoHS Compliant and Halogen-Free